Solis Zero Installation Guide - Android Devices

How to install and set up Solis Zero on Android Device:

Examples below is from a Samsung Galaxy device.

1. Go to 'Settings' and select 'Connections'

2. Select 'SIM Manager'

3. Click on 'Add eSIM'

4. Select 'Scan QR code from service provider'

5. At this point, you may enter the activation code manually or scan QR code to activate your eSIM

Manual Method

• Click 'Enter activation code'. Your activation code can be found in the booking confirmation email sent to the email provided. 
• 
• After you enter the activation code, click on 'Connect' to proceed.
• 
• Click 'Add' to install your eSIM onto your device.
• 
• Once the eSIM is installed, you will be brought to the Setting page. Scroll down and click 'Mobile Data'.
• 
• Select the eSIM you installed and make sure it's 'On'
• 

QR Code Method

• Use your printed QR code or another device that displays the QR Code to scan your eSIM QR Code.
• Your eSIM QR code can be found in the booking confirmation email.
• 
• After you enter the activation code, click on 'Connect' to proceed.
• 
• Click 'Add' to install your eSIM onto your device.
• 
• Once the eSIM is installed, you will be brought to the Setting page. Scroll down and click 'Mobile Data'.
• 
• Select the eSIM you installed and make sure it's 'On'
• 

Click here to visit Samsung's website for additional instructions on setting up eSIM.

Click here to check if your device is compatible with eSIM.