Connect Solis Hub to a Wi-Fi Extender Using WPS

You can use Wi-Fi Protected Setup (WPS) to quickly connect your Solis Hub to a compatible Wi-Fi extender without manually entering the network name (SSID) and password.

To connect using WPS

1. Ensure your Wi-Fi extender is powered on and within range of the Solis Hub.
2. Press and hold the WPS button on the Solis Hub for 1–5 seconds to enable WPS pairing mode.
3. Within two minutes, press and hold the WPS button on your Wi-Fi extender.
4. Wait for the devices to establish a connection.

How do I know the connection was successful?

Once the pairing is complete, the WPS indicator light on the Solis Hub will illuminate, confirming that the connection has been established successfully.

Note: WPS is only available on compatible Wi-Fi extenders and routers. If your extender does not support WPS or the connection is unsuccessful, you can connect it manually using the Wi-Fi network name (SSID) and password.